Install Di-Noc Wrap on Drywall | Wall Vinyl Tips, Primer Fixes & Pro Techniques (Day 2)

Welcome to Day 2 of this professional wall wrap installation using Di-noc vinyl! In this video, we walk through the detailed process of applying WG-832 series Di-noc Wrap over drywall, addressing real-world challenges like adhesion issues and improper priming.

#### 1. Design and Installation Setup - Columns are being visually simulated using vinyl wrap. - The walls are drywall, and the Di-Noc vinyl is Wg-832 wood grain. - Vinyl layout includes cutting 45-degree angles for cleaner edges.

#### 2. Challenges with Adhesion - Vinyl wasn’t sticking properly due to the wrong primer or improper technique. - A viewer commented the issue was likely because the primer wasn't back rolled. - Back rolling helps primer bond better to drywall—important for proper adhesion.

#### 3. Professional Insights - The speaker, with 13 years of painting experience, discusses how many construction crews use cheap primer and paint. - Emphasizes the need to ask contractors about the materials used for better project planning.

#### 4. Material Usage - Used about 1¾ rolls of vinyl, each roll being 164 ft long. - Describes how vinyl was applied section by section.

#### 5. Preparation Advice - Use a good primer, allow to cure overnight, then apply the Di-noc. - Smooth, level 5 finish is ideal—vinyl will highlight any flaws underneath. - Recommends Zinsser Gardz as a sealing product before vinyl application.

208-696-1180 | info@rmwraps.com

Architectural Film Store: https://www.rmwrapsstore.com/